UDQ2916LB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDQ2916 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UDQ2916LB Overview
Drivers controllers is designed wDrivers controllersh a package of [0].Parts are packaged in 24-SOIC (0.295, 7.50mm Width)cases.Mounting the part by Surface Mountis recommended.The component connected in General Purposematches it perfectly.The device is capable of supplying a voltage of 4.75V~5.25V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.The motor type can be classified as Brushed DC.The part has 24terminations available.There is the option of applying the voltage to the load at the rate of 10V~45V.Please take in mind that this amplifier should be run at 5V.A Surface Mountmounting method is recommended for this product.Maintain a 750mAoutput current for the part.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.According to the UDQ2916part number, the part is found.The item belongs to the Motion Control Electronics series.In addition to this, it is also characterized by ALSO REQUIRES 10V TO 45V VBB SUPPLY.
UDQ2916LB Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on UDQ2916 number
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
UDQ2916LB Applications
There are a lot of Allegro MicroSystems UDQ2916LB motor drivers applications.
- Telltale lights
- Landscape lighting
- Hospitality buildings
- Monitoring the energy that the luminaire uses
- LED bias
- Emergency lighting
- parking lights
- Display LED backlighting
- Architectural lighting
- A cross between entertainment
