UDQ2916LBTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UDQ2916 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UDQ2916LBTR-T Overview
This package was designed with Tape & Reel (TR)in mind.The part is packged with 24-SOIC (0.295, 7.50mm Width) case.To mount the part by [0], it is recommended that you do so.The component connected in General Purposeis compatible with it.In this case, the device can supply 4.75V~5.25V volts.A range of -40°C~150°C TJis available for operating temperature.A motor of this type can be categorized as Brushed DC.The part supports 24terminations.At a rate of [0], voltage can be applied to the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.Surface Mountis its recommended mounting method.Keep the part output current at 750mA.The device employs the STEPPER MOTOR CONTROLLER analog IC.As a result of the UDQ2916part number, it can be found.This device is designed with a pin count of 24.Drivers controllers is a part of the Motion Control Electronics series.The characteristic of ALSO REQUIRES 10V TO 45V VBB SUPPLYis also present.
UDQ2916LBTR-T Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on UDQ2916 number
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
UDQ2916LBTR-T Applications
There are a lot of Allegro MicroSystems UDQ2916LBTR-T motor drivers applications.
- Industrial lighting
- Daytime running lights (DRLs)
- High brightness LED lighting
- High power LED street light
- Smart lighting applications
- Horticultural applications
- Charge pump circuits
- Large format LED backlighting
- Telltale lights
- Multiple output capability
