UDQ2982LW-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 35V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | UDQ2982 |
| Pin Count | 18 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Polarity | NPN, PNP |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 120mA |
| Collector Emitter Voltage (VCEO) | 50V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~50V |
| Driver Number of Bits | 8 |
| Collector Emitter Saturation Voltage | 1.8V |
| Turn On Time | 2 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.65mm |
| Length | 11.55mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UDQ2982LW-T Overview
The package is in the form of a Tube.There is a 18-SOIC (0.295, 7.50mm Width) package that includes it.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~85°C TA.The lighting driver is equipped with 8 outputs that can be used.A voltage of Not Required is used to power it.A maximum output voltage of Bipolar volts can be obtained with this LED driver.This object belongs to the UDQ2982 family.As a result, there are 18 terminations.For operation, 18 pins are used.Currently, there are 8 functions associated with the lighting driver.This operation requires the maximum output current to be decreased to 500mA.The supply voltage of 35V is conducive to high efficiency.The lighting driver is mounted in the direction of Surface Mount.18 pins are equipped with it.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 5V.
UDQ2982LW-T Features
Supplied from 35V
UDQ2982LW-T Applications
There are a lot of Allegro MicroSystems UDQ2982LW-T Power Switches ICs applications.
- Smartphone and PDA
- Various applications equipped with buttons
- Portable GPS
- Gaming
- USB Power Distribution
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- Portable Devices
- Portable Music Players
- Set-top-box
