banner_page

UJA1078ATW/3V3,118

0.65mm 4.5/28V Specialized Interface IC UJA1078 14V 32-TSSOP (0.240, 6.10mm Width) Exposed Pad


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-UJA1078ATW/3V3,118
  • Package: 32-TSSOP (0.240, 6.10mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 215
  • Description: 0.65mm 4.5/28V Specialized Interface IC UJA1078 14V 32-TSSOP (0.240, 6.10mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 32-TSSOP (0.240, 6.10mm Width) Exposed Pad
Surface Mount YES
Packaging Tape & Reel (TR)
Published 2009
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 32
Terminal Finish MATTE TIN
Applications Automotive
HTS Code 8542.39.00.01
Subcategory Network Interfaces
Voltage - Supply 4.5V~28V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 14V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number UJA1078
Pin Count 32
JESD-30 Code R-PDSO-G32
Qualification Status Not Qualified
Operating Temperature (Max) 125°C
Operating Temperature (Min) -40°C
Power Supplies 4.5/28V
Interface CAN, LIN
Supply Current-Max 0.000099mA
Data Rate 1000 Mbps
Screening Level AEC-Q100
Telecom IC Type CAN TRANSCEIVER
Number of Transceivers 1
Height Seated (Max) 1.1mm
Length 11mm
Width 6.1mm
RoHS Status ROHS3 Compliant

UJA1078ATW/3V3,118 Overview


It is appropriate for the device to use the 32-TSSOP (0.240, 6.10mm Width) Exposed Padpackage.The item is packaged in a Tape & Reel (TR) case.This component is installed in the way of Surface Mount.Automotiveapplies to this component.It is possible to obtain devices that supply 4.5V~28V volts.A UJA1078can be used to identify related parts.It has 32terminations.Keep in mind that this device should be set to 14V.Operation is carried out using the 32pins.Electronic components of the Network Interfacesfamily are used.Potentiometers conduct at 125°C volts.The device is capable of delivering voltage at 4.5/28V.A temperature of -40°C is the minimum operating temperature for the component.IC type CAN TRANSCEIVERis used in the device.

UJA1078ATW/3V3,118 Features


It is based on UJA1078.
Set the part at 14V volts
Telecom IC Type : CAN TRANSCEIVER

UJA1078ATW/3V3,118 Applications


There are a lot of NXP USA Inc. UJA1078ATW/3V3,118 Specialized Interface ICs applications.

  • Industrial control systems
  • Cross Connects
  • Data switching
  • Battery Powered Instruments
  • DVD-R
  • Fault Tolerant Systems
  • Relay Replacement
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG,
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Communications systems

Write a review

Note: HTML is not translated!
    Bad           Good