USB1T11AMTC
| Parameters | |
|---|---|
| Number of Drivers/Receivers | 1/1 |
| Propagation Delay (tpd) | 300 ns |
| Duplex | Half |
| ESD Protection | Yes |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 55.3mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | USB1T11A |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 5mA |
| Number of Ports | 2 |
| Nominal Supply Current | 5mA |
| Max Supply Current | 5mA |
| Number of Bits | 1 |
| Family | USB |
| Data Rate | 12Mbps |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Protocol | USB 1.1 |
USB1T11AMTC Overview
An excellent driver IC for common LEDs thanks to its enhanced 14-TSSOP (0.173, 4.40mm Width) package.In the Tube package, this receiver is mounted.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.A Surface Mount-type PCB or development board can be used to place this wide receiver.A differential driver like this uses 3V~3.6V of power.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.Driver ICs with a supply voltage range of 3.3V can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.USB1T11A is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation driver IC with 14 pins.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.An input voltage supply of 3.3V is required to operate the transceiver module.Input voltage is set to a value of 5mA, and this integrating circuit is capable of driving LEDs with that voltage.In the event that the input current reaches or exceeds 5mA, the can transceiver may malfunction.A supply voltage of less than 3.6V is recommended for this transceiver module according to its manufacturer.In order to run this module isolated transceiver, you should apply at least 3V voltage supply to it.It is embedded with a total of 1 channels on this optical transceiver.
USB1T11AMTC Features
Tube package
14 pins
1 channels
USB1T11AMTC Applications
There are a lot of ON Semiconductor USB1T11AMTC Drivers/Receivers/Transceivers applications.
- AV receiver
- Wireless smart house
- Wireless interactive experience
- Transmission stations
- Laser diode bonding
- High-speed computer links
- Low power, low voltage systems
- Switching system
- Metro access rings
- Satellite communication
