USB5926C-I/KD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 100-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Additional Feature | IT ALSO REQUIRES 3.3V SUPPLY |
| Technology | CMOS |
| Voltage - Supply | 1.08V~1.32V 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.4mm |
| JESD-30 Code | S-PQCC-N100 |
| Function | Hub Controller |
| Interface | I2C, SMBus, SPI, UART |
| uPs/uCs/Peripheral ICs Type | BUS CONTROLLER, UNIVERSAL SERIAL BUS |
| Clock Frequency | 25MHz |
| Protocol | USB |
| Screening Level | TS 16949 |
| Standards | USB 2.0, USB 3.1 |
| Data Transfer Rate-Max | 625 MBps |
| Height Seated (Max) | 0.9mm |
| Length | 12mm |
| Width | 12mm |
| RoHS Status | ROHS3 Compliant |
USB5926C-I/KD Overview
There is a package called 100-VFQFN Exposed Pad that contains it, and you can find it there. Keeping the temperature at -40°C~85°C TA will ensure reliable operation. It should work as long as you use a 1.08V~1.32V 3V~3.6VV power source. As you can see, the terminations of the wire are in 100. Supply voltages of 1.2V can achieve high efficiencies. I have found that this gadget has a total of BUS CONTROLLER, UNIVERSAL SERIAL BUS uPs/uCs/peripheral ICs in total. The device runs at a frequency of 25MHz, which is determined by its clock. IT ALSO REQUIRES 3.3V SUPPLY can also be generated using this device.
USB5926C-I/KD Features
25MHz clock frequency
USB5926C-I/KD Applications
There are a lot of Microchip Technology USB5926C-I/KD Controllers Interface ICs applications.
- PDAs
- Embedded, Industrial Controller
- Industrial and Embedded PCs
- Telecom, 5G LTE Base-Station
- Desktop PCs
- AC?DC PD 3.0 Compliant Adapters
- STBs
- Set-Top Boxes
- Instrumentation
- Tablets
