V62/05601-03ZE
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 176 |
| Weight | 1.896186g |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 176 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | ALSO OPERATES AT 1.8V SUPPLY AT 135MHZ |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.9V |
| Terminal Pitch | 0.5mm |
| Frequency | 150MHz |
| Pin Count | 176 |
| Operating Supply Voltage | 1.9V |
| Power Supplies | 1.93.3V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.81V |
| Memory Size | 256kB |
| RAM Size | 36kB |
| Memory Type | OTP, ROM |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Bit Size | 32 |
| Frequency (Max) | 150MHz |
| Data Bus Width | 32b |
| PWM Channels | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 16 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Number of UART Channels | 2 |
| RAM (bytes) | 36864 |
| Number of Timers | 8 |
| ROM Programmability | FLASH |
| Number of External Interrupts | 3 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Number of GPIO | 56 |
| Height | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
V62/05601-03ZE Overview
In electronic terms, it is a type of component that comes in the package of type LQFP .In terms of its uses, it has 176 terminations.A voltage of 1.9V is used as the supply voltage.176 component pins are present.Its configuration includes 176 pins.In order for the device to operate at the frequency of 150MHz, it has been designed specifically.Surface Mount is the method of mounting it.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.The minimum voltage supplied to this device is as low as 1.81V.A maximum voltage of 3.47V can be provided to this device.A voltage of 1.9V is used as the supply voltage.It can store 256kB data in its memory.1.93.3V electric power supplies it.In 2 UART channels, the data format and transmission speeds may be customi2ed for asynchronous serial communication.With this electronic part, additional features of ALSO OPERATES AT 1.8V SUPPLY AT 135MHZ can also be provided.A DIGITAL SIGNAL PROCESSOR, OTHER type UP/UC/Peripheral IC is employed in its uP/UC/Peripheral ICs.A OTP, ROM memory type is used.125°C should be lower than the operating temperature.Temperatures should exceed -55°C during operation.Industrial environments have 8 timers that provide accurate feedback and trigger events.There are 3 interrupts caused by external factors.A frequency of less than 150MHz should be used.There are 56 GPIO acting as interfaces to provide an ease of access to the devices internal properties.An A/D converter with 16 input is included.
V62/05601-03ZE Features
Supplied in the LQFP package
Operating supply voltage of 1.9V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
3 external interrupts
V62/05601-03ZE Applications
There are a lot of Texas Instruments V62/05601-03ZE DSP applications.
- Machinery and equipment
- Remote sensing image processing technology
- Seismology
- Automobile electronic gadgets
- Instrument modeling
- Tomography technology
- Smart camera
- Sound navigation and ranging systems
- Dam design
- 3D tomography and imaging processing
