V62/09608-01XE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC1T45 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Power Supplies | 3.3V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Number of Ports | 2 |
| Propagation Delay | 20.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | Inverting, Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.032 A |
| Number of Bits per Element | 1 |
| High Level Output Current | 32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 0.004mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
V62/09608-01XE Overview
Package 6-TSSOP, SC-88, SOT-363 includes it.Packaged as Tape & Reel (TR).In its configuration, Tri-State, Non-Inverted is used as the output.The translator type of this electrical device is Voltage Level.Level translators is mounted according to the Surface Mount method.Bidirectional is the type of channel for this electrical device.The operating temperature is -55°C~125°C TA.A transmission line can be terminated with 6 terminations.According to the base part number 74LVC1T45, its related parts can be founded.A supply voltage of 1.8V is used to power the device.There are 6 pins on this device.Level translators is a type of FPGA belonging to the 74LVC series.Level translators is designed wLevel translatorsh 6 pins.Level translators supports a maximum supply voltage of 5.5V.A voltage of 1.65V is the minimum supply voltage required for it to operate.There is a configuration of 1.65V~5.5V for the VCCA supply rail.VCCB is configured with a supply rail that starts at 1.65V~5.5V.Using the method of Surface Mount, this electronic component is mounted.This object belongs to the category of Bus Driver/Transceivers.There is BUS TRANSCEIVER logic IC in it.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.In terms of electronic devices, this one is in the LVC/LCX/Z family.3.3V power supplies are required to run it.This device is well suited for TR based on its reliable performance.
V62/09608-01XE Features
6-TSSOP, SC-88, SOT-363 package
6 pin count
74LVC series
6 pins
3.3V power supplies
V62/09608-01XE Applications
There are a lot of Texas Instruments V62/09608-01XE voltage translators & level shifters applications.
- Monitors
- Smartphone
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Debouncing a Mechanical Switch
- Power-sensitive applications
- GPIO
- Industrial
- One Assembly and Test Site
- Telecom
- Test Site
