Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
4Ohm |
Max Power Dissipation |
4.9mW |
Reach Compliance Code |
not_compliant |
Base Part Number |
ADG1408 |
Operating Supply Voltage |
12V |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
5V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Bandwidth |
60MHz |
Turn-Off Delay Time |
100 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
4.7Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Current - Leakage (IS(off)) (Max) |
200pA |
Channel Capacitance (CS(off), CD(off)) |
14pF 80pF |
Switch Time (Ton, Toff) (Max) |
120ns, 120ns |
Charge Injection |
50pC |
Channel-to-Channel Matching (ΔRon) |
780m Ω (Max) |
Crosstalk |
-70dB @ 1MHz |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
V62/11612-01XB Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operating temperature around -55°C~125°C TA extended. High-quality output is provided by the electronic component's 8 channels. A 1 circuit is present in this switch device. Try searching for ADG1408 variants of the analog switch ic. This digital multiplexer has 4Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. 5V should be the lowest voltage fed to the electronic component. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. When using dual power supplies, you should attach at least 4.5V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. It can operate from 12V operating voltages. 60MHz bandwidths enable data to be transferred.
V62/11612-01XB Features
8 Channels
Bandwidth: 60MHz
V62/11612-01XB Applications
There are a lot of Analog Devices Inc. V62/11612-01XB Analog Switches & Multiplexers ICs applications.
- Wireless Local Loop
- Sample hold systems
- Video signal routing
- SDH
- Digital cross connects (DSX-1)
- Microprocessor Controlled Analog Systems
- Precision test equipment
- 65 V DACs
- SDH/SONET multiplexers
- PCMCIA cards