Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
PowerSO-10 Exposed Bottom Pad |
Number of Pins |
10 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
VB326 |
Pin Count |
10 |
Number of Outputs |
1 |
Output Type |
Bipolar |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
4.5V |
Interface |
Parallel |
Current - Output (Max) |
11A |
Output Configuration |
Low Side |
Voltage - Supply (Vcc/Vdd) |
4.5V~5.5V |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Ratio - Input:Output |
1:1 |
Voltage - Load |
30V Max |
Fault Protection |
Over Temperature |
Turn On Time |
5 µs |
Output Peak Current Limit-Nom |
9A |
Turn Off Time |
25 µs |
Built-in Protections |
TRANSIENT; THERMAL |
Output Current Flow Direction |
SINK |
Supply Voltage1-Min |
5.3V |
Supply Voltage1-Max |
24V |
Height Seated (Max) |
3.65mm |
Length |
9.4mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
VB326SP Overview
Tube is the way it's packaged.The PowerSO-10 Exposed Bottom Pad package contains it.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.A voltage of 4.5V~5.5V is used to power it.A maximum output voltage of Bipolar volts can be obtained with this LED driver.A lighting driver with Status Flag features is available.It belongs to the VB326 family.There are 10 terminations in it.The 10 pins are used for the operation of the system.Currently, there are 1 functions associated with the lighting driver.11AV is the maximum output of the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 5V.As a result, it is mounted in the manner of Surface Mount.10 pins are connected to it in total.It belongs to the VIPower? series.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).Normal operation requires a voltage above 4.5V for the supply voltage.
VB326SP Features
Supplied from 5V
VB326SP Applications
There are a lot of STMicroelectronics VB326SP Power Switches ICs applications.
- Hot-Swap Systems
- Smartphone and PDA
- Solid-State Drives
- USB Protection
- Solid State Drivers
- Portable Video Game Players
- Portable Devices
- USB Ports/Hubs
- PC Cards
- Telecom and Network Systems