VCA2614Y/2K
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.801575mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Resistance | 600kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VCA2614 |
| Pin Count | 32 |
| Output Type | Differential |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 60mA |
| Slew Rate | 300V/μs |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 4.75V~5.25V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 50mV |
| Bandwidth | 40MHz |
| Gain Bandwidth Product | 100MHz |
| Voltage Gain | 45dB |
| Current - Output / Channel | 40mA |
| Input Voltage Noise Density | 4.8nV/sqrt Hz |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VCA2614Y/2K Overview
Packaging for the buffer amplifier is in the form of a 32-TQFP case. An op amp ic of the Variable Gain type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. It is estimated that there will be 32 terminations in the next few months. In total, there are 32 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In more specific terms, this linear amplifier can be categoriOther Analog ICsed as a Other Analog ICs-type device. 32 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 50mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Op amp is a member of the 45dB's 45dB family. One of its many advantages is that buffer op amp outputs Differential signals. There are 2 elements in total in this linear amplifier. Op amp resistance should stay within the range of 600kOhm. An analog IC known as a ANALOG CIRCUIT is the other type of IC that is used in this op amp ic.
VCA2614Y/2K Features
32 Pins
supply voltage of 5V
45dB voltage gain
Output Type: Differential
Resistance of 600kOhm
VCA2614Y/2K Applications
There are a lot of Texas Instruments VCA2614Y/2K Instrumentational OP Amps applications.
- Home audio systems
- Cinema or auditorium audio system
- Inverse/same-phase proportional circuit
- Navigation
- Logarithmic operation circuits
- Power transmission
- Broadcasting
- Portable docking station
- Image computer boards
- Fission chambers
