VCA2617RHBR
| Parameters | |
|---|---|
| Number of Elements | 4 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 25mA |
| Slew Rate | 100V/μs |
| Amplifier Type | Variable Gain |
| Voltage - Supply, Single/Dual (±) | 4.75V~5.25V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 50mV |
| Bandwidth | 50MHz |
| Voltage Gain | 48dB |
| Input Voltage Noise Density | 4.1nV/sqrt Hz |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.206235mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Resistance | 300kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VCA2617 |
| Pin Count | 32 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
VCA2617RHBR Overview
There is a 32-VFQFN Exposed Pad case in which the instrumentation amplifier is packaged. Op amps are Variable Gain types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. During the past two weeks, there have been close to 32 terminations. A total of 32 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Other Analog ICs-type of devices. 32 pins are included on the operational amplifiers. Op amp rates 50mV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . It is a member of the 48dB's 48dB family. This op amp ic has 2 circuits. On the buffer amps, there are 2 channels that can be used. One of the many benefits of this op amp ic is that it emits Differential signals. A total of 4 elements are present in this linear amplifier. In order for the buffer amplifier resistance to remain within the 300kOhm range, the device should be tested. An analog IC that is also used in this instrumentation amplifier is referred to as the ANALOG CIRCUIT type.
VCA2617RHBR Features
32 Pins
supply voltage of 5V
48dB voltage gain
Output Type: Differential
Resistance of 300kOhm
VCA2617RHBR Applications
There are a lot of Texas Instruments VCA2617RHBR Instrumentational OP Amps applications.
- Digital cameras
- Band-stop filter
- Micro signal measurement
- High-frequency data acquisition systems
- Laptop
- Professional videography
- Integrator circuits
- Wireless base stations
- Blood pressure sensors
- Weighing systems
