VCA2619YT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.801575mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Resistance | 600kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VCA2619 |
| Pin Count | 32 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 60mA |
| Power Dissipation | 300mW |
| Slew Rate | 300V/μs |
| Amplifier Type | Variable Gain |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 4.75V~5.25V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 50mV |
| Bandwidth | 20MHz |
| Gain Bandwidth Product | 100MHz |
| Voltage Gain | 50dB |
| Current - Output / Channel | 40mA |
| Input Voltage Noise Density | 5.9nV/sqrt Hz |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VCA2619YT Overview
There is a 32-TQFP case in which the instrumentation amplifier is packaged. Variable Gain-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. It is estimated that there will be at least 32 terminations this year. A total of 32 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Other Analog ICs device. 32 pins are available on the instrumentation amplifier. There is an input offset voltage of 50mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Voltage gain should remain at 50dB. As one of the many benefits of this buffer amplifier, it puts out Differential signals, which is one of the many benefits it offers. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. It is important to keep the resistance within the 600kOhm range of the linear amplifier. An analog IC known as a ANALOG CIRCUIT is the other type of IC that is used in this op amp ic.
VCA2619YT Features
32 Pins
supply voltage of 5V
50dB voltage gain
Output Type: Differential
Resistance of 600kOhm
VCA2619YT Applications
There are a lot of Texas Instruments VCA2619YT Instrumentational OP Amps applications.
- Commercial audio systems
- Displayers for aircraft and air transportation control systems
- Weighing systems
- Integrator circuits
- Medical imaging
- Power control
- Communication device
- Signal transformation
- High/low-pass filter circuit
- Comparator
