VCA810IDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | VCA810 |
| Pin Count | 8 |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 14.5mA |
| Slew Rate | 350V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 6μA |
| Max Input Voltage | -2.7V |
| Voltage - Supply, Single/Dual (±) | ±4V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 35MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 35000 kHz |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 30MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 200μV |
| Input Offset Current-Max (IIO) | 0.6μA |
| Input Voltage Noise Density | 2.4nV/sqrt Hz |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VCA810IDG4 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Variable Gain-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. Regarding input offset voltage, op amp rates 250μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . An 20mA volt supply current is needed for this linear amplifier to operate. This op amp contains 1 circuits. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 3. It is recommended to keep the buffer amps resistance within the range of 1MOhm.
VCA810IDG4 Features
8 Pins
supply voltage of 5V
Resistance of 1MOhm
VCA810IDG4 Applications
There are a lot of Texas Instruments VCA810IDG4 Instrumentational OP Amps applications.
- Comparator
- Displayers for aircraft and air transportation control systems
- Video data acquisition
- Fast A/D and D/A converters
- Gaming industry
- earphone
- Medical imaging
- Switching amplifier
- Division circuits
- Automation control systems
