VCA810IDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VCA810 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 14.5mA |
| Slew Rate | 350V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 6μA |
| Max Input Voltage | -2.7V |
| Voltage - Supply, Single/Dual (±) | ±4V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 35MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 35000 kHz |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 30MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 200μV |
| Input Offset Current-Max (IIO) | 0.6μA |
| Input Voltage Noise Density | 2.4nV/sqrt Hz |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VCA810IDRG4 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are available on the instrumentation amplifier. There is an input offset voltage of 250μV for this buffer op amp. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 20mA volt supply current is needed for this linear amplifier to operate. There are 1 circuits on this op amp. The op amp is rated for an operating supply voltage of 3. An buffer amplifier is packed in a TR-shape according to the design. 1MOhm should be the range of resistance for the instrumentation amplifier.
VCA810IDRG4 Features
8 Pins
supply voltage of 5V
Resistance of 1MOhm
VCA810IDRG4 Applications
There are a lot of Texas Instruments VCA810IDRG4 Instrumentational OP Amps applications.
- Precision measurement
- Video data acquisition
- Test equipment
- Multimedia playback equipment
- Signal filtering
- Medical imaging
- Power generator
- Gaming industry
- Non-polarized electrodes
- Video amplifiers
