VCA820IDGST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 500kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VCA820 |
| Pin Count | 10 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 34mA |
| Slew Rate | 1700V/μs |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 19μA |
| Voltage - Supply, Single/Dual (±) | ±3.5V~6V |
| Output Current per Channel | 160mA |
| Input Offset Voltage (Vos) | 17mV |
| Bandwidth | 168MHz |
| Supply Current-Max (Isup) | 36mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 40dB |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Voltage - Input Offset | 4mV |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 17mV |
| Input Voltage Noise Density | 8.2nV/sqrt Hz |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VCA820IDGST Overview
Packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Variable Gain-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 10. In this case, there are 10 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Other Analog ICs op amps in this case, and this device falls into one of them. There are 10 pins on this chip. Op amp ic rates 17mV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. The buffer amplifier is capable of operating from a supply current of 34mA . Maintain 40dB as the voltage gain. There are 1 channels on the operational amplifiers. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. Linear amplifier resistance should stay within the range of 500kOhm. The other types of analog IC are as follwed ANALOG CIRCUIT.
VCA820IDGST Features
10 Pins
supply voltage of 5V
40dB voltage gain
Resistance of 500kOhm
VCA820IDGST Applications
There are a lot of Texas Instruments VCA820IDGST Instrumentational OP Amps applications.
- Test and measurement instruments
- Strain gauges
- earphone
- Logarithmic operation circuits
- Wireless base stations
- pH (acidity)
- Power control
- Fission chambers
- Signal transformation
- single/dual op amp sum and difference circuits
