VCA820IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| Resistance | 500kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VCA820 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 34mA |
| Slew Rate | 1700V/μs |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 19μA |
| Voltage - Supply, Single/Dual (±) | ±3.5V~6V |
| Output Current per Channel | 160mA |
| Input Offset Voltage (Vos) | 17mV |
| Supply Current-Max (Isup) | 36mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 40dB |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Voltage - Input Offset | 4mV |
| -3db Bandwidth | 168MHz |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 17mV |
| Input Voltage Noise Density | 8.2nV/sqrt Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VCA820IDR Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Variable Gain-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. In this case, there are 14 pins on the board. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Other Analog ICs buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 14 pins. As far as the input offset voltage is concerned, linear amplifier rates at 17mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 34mA, this op amp ic can operate. There should be no change in the voltage gain. 1 channels are available on the instrumentation amplifier. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. It is important that the linear amplifier resistance stays within the range of 500kOhm. An analog IC known as ANALOG CIRCUIT is also used in this linear amplifier.
VCA820IDR Features
14 Pins
supply voltage of 5V
40dB voltage gain
Resistance of 500kOhm
VCA820IDR Applications
There are a lot of Texas Instruments VCA820IDR Instrumentational OP Amps applications.
- Gaming industry
- E-book readers
- Automation control systems
- Switching amplifier
- Test and measurement instruments
- High speed sample
- PDA
- Navigation
- Subtraction operation circuits
- Industrial control system
