VCA822IDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | VCA822 |
| Pin Count | 14 |
| Operating Supply Voltage | 12V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 36mA |
| Nominal Supply Current | 38mA |
| Slew Rate | 1700V/μs |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 19μA |
| Voltage - Supply, Single/Dual (±) | ±3.5V~6V |
| Output Current per Channel | 160mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 150MHz |
| Gain Bandwidth Product | 200MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 40dB |
| Power Supply Rejection Ratio (PSRR) | 81dB |
| Voltage - Input Offset | 4mV |
| -3db Bandwidth | 168MHz |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 17mV |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VCA822IDG4 Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called Variable Gain-types. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 14. In this case, there are 14 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Other Analog ICs op amp ic can be identified by the fact that this is a type of Other Analog ICs device. 14 pins are located on the operational amplifiers. Op amp ic rates 2.5mV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureThis op amp can operate from a supply current at 36mA. Voltage gain should remain at 40dB. 1 channels are available on the instrumentation amplifier. There is a rating of 1 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 12V voltage. It should be noted that the other type of analog integrated circuit used in this instrumentation amplifier is known as the ANALOG CIRCUIT.
VCA822IDG4 Features
14 Pins
supply voltage of 5V
40dB voltage gain
VCA822IDG4 Applications
There are a lot of Texas Instruments VCA822IDG4 Instrumentational OP Amps applications.
- Commercial audio systems
- Biopotential
- Video computer boards
- ECG equipment
- Automotive sensors
- High-frequency data acquisition systems
- Displayers for aircraft and air transportation control systems
- Communication device
- Thermocouples
- Power transmission
