VIPER06HS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-SOP (0.154, 3.90mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 8W |
| Max Power Dissipation | 8W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VIPER06 |
| Input Voltage-Nom | 14V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 11.5V~23.5V |
| Output Power | 8W |
| Topology | Buck, Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 115kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature |
| Max Duty Cycle | 80 % |
| Duty Cycle | 70% |
| Output Isolation | Either |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 13V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER06HS Overview
In the package 10-SOP (0.154, 3.90mm Width) , the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.Surface Mount mounts this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.Switching frequency reaches 115kHz Hz.Vcc/Vdd can be used within the range of 11.5V~23.5V supply voltage.As a result, it has had 10 terminations.Approximately 10 pins are present on the ac/dc converter.Surface Mount is a suitable mounting point for the ac dc converters.The AC to DC converter belongs to the manufacturer family of VIPer? plus .A similar acdc converter can be searched by using the VIPER06 family.The ac to dc conversions are included in Switching Regulator or Controllers .SVHC for REACH can be found in the standard No SVHC .Input voltages under 265V can be used to power the AC to DC converter.In the AC to DC transformer of a coverter, the output power generated is 8W .The AC to DC inverter may be operated with an input voltage less than 85V volts.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .The number of channels is 1 .
VIPER06HS Features
Packaged with 10-SOP (0.154, 3.90mm Width)
Switching Frequency at 115kHz
With 10 pins
With 1 channels on it
VIPER06HS Applications
There are a lot of STMicroelectronics VIPER06HS AC DC Converters applications.
- Adapters
- Standby and Auxiliary Power Supplies
- Z-Wave
- Standby power supplies for VCR
- Battery chargers for mobile devices with touchpad display
- LED Driver
- AC-DC Output Power Conversion Applications
- Portable audio
- Adapter/Charger for Cell
- Standby Power Supplies
