VIPER06LSTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-SOP (0.154, 3.90mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPer™ plus |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Power (Watts) | 8W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 8W |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VIPER06 |
| Output Voltage | 800V |
| Input Voltage-Nom | 14V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 1.45mA |
| Voltage - Supply (Vcc/Vdd) | 11.5V~23.5V |
| Output Power | 30mW |
| Topology | Buck, Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 60kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature |
| Max Duty Cycle | 80 % |
| Max Junction Temperature (Tj) | 150°C |
| Duty Cycle | 70% |
| Output Isolation | Either |
| Voltage - Start Up | 13V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER06LSTR Overview
A ac to dc converter of the package 10-SOP (0.154, 3.90mm Width) contains the ac to dc converter.It is available in Tape & Reel (TR) AC/DC power converter.A AC/DC converter of this type is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .At this point, the switching frequency reaches 60kHz .Vcc/Vdd can be used within the range of 11.5V~23.5V supply voltage.There have been 10 terminations of this program.A ac/dc converter with 10 pins is available.The ac dc converters are suitable for mounting by Surface Mount .It belongs to a manufacturer family of VIPer? plus .It is possible to search for similar acdc converters by using the VIPER06 family.The ac to dc conversions are included in Switching Regulator or Controllers .In this AC to DC transformer, the output voltage is 800V .SVHC for REACH can be found in the standard No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.The output power of a coverter is assumed to be 30mW .An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.A AC to DC power converter's input voltage (AC) should not exceed 265V .The number of channels is 1 .
VIPER06LSTR Features
Packaged with 10-SOP (0.154, 3.90mm Width)
Switching Frequency at 60kHz
With 10 pins
With 1 channels on it
VIPER06LSTR Applications
There are a lot of STMicroelectronics VIPER06LSTR AC DC Converters applications.
- Humidifier
- AC-DC Output Power Conversion Applications
- Cleaners
- Appliances
- Low power ac?dc Adapters for Chargers
- Low-Voltage I/O System Power
- ATX/BTX Auxiliary Power
- Universal Off-Line Power Supplies
- Remotely-controlled appliances
- Power adapters for network devices
