VIPER06XSTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-SOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPer™ plus |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 8W |
| Max Power Dissipation | 8W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VIPER06 |
| Output Voltage | 800V |
| Input Voltage-Nom | 14V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 1.3mA |
| Voltage - Supply (Vcc/Vdd) | 11.5V~23.5V |
| Output Power | 30mW |
| Topology | Buck, Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 30kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature |
| Max Duty Cycle | 80 % |
| Duty Cycle | 70% |
| Output Isolation | Either |
| Voltage - Start Up | 13V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER06XSTR Overview
This ac to dc converter is included in the package 10-SOP (0.154, 3.90mm Width) .It is available in Tape & Reel (TR) AC/DC power converter.There is a mounting point for this AC/DC converter in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.Switching frequency reaches 30kHz Hz.The voltage range of the supply can be set to 11.5V~23.5V (Vcc/Vdd).It has a total of 10 terminations.On the ac/dc converter, there are 10 pins.The product is acdc converter of the VIPer? plus manufacturer family.If you select the VIPER06 family, you will be able to search similar acdc converters.The ac to dc conversions can be found in Switching Regulator or Controllers .There is 800V voltage output from it.SVHC for REACH can be found in the standard No SVHC .Input voltage for the AC to DC converter is available under 265V .It is assumed that a coverter generates 30mW as its output power.The AC to DC inverter can be used with an input voltage of less than 85V V.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .A total of 1 channels exist.
VIPER06XSTR Features
Packaged with 10-SOP (0.154, 3.90mm Width)
Switching Frequency at 30kHz
With 10 pins
With 1 channels on it
VIPER06XSTR Applications
There are a lot of STMicroelectronics VIPER06XSTR AC DC Converters applications.
- Adaptors for DSCs
- Battery chargers for cordless
- Z-Wave
- Universal Off-Line Power Supplies
- Battery Chargers
- Auxiliary Power Supplies
- AC/DC Adaptors/Chargers for Cordless Phone
- Adapter/Charger for Cordless Phones
- Vacuum Cleaner
- USB-PD 2.0
