VIPER100
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | Pentawatt-5 HV (Bent and Staggered Leads) |
| Number of Pins | 5 |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | 25°C |
| Power (Watts) | 100W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 82W |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Frequency | 200kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VIPER100 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 620V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Quiescent Current | 12mA |
| Control Features | EN, Frequency Control, Soft Start |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Height | 9.2mm |
| Length | 10.4mm |
| Width | 4.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VIPER100 Overview
An embedded ac to dc converter is included in Pentawatt-5 HV (Bent and Staggered Leads) package.In Tube case, the ac dc converter is available.This AC/DC converter is mounted in the way of Surface Mount .A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.When the switching frequency reaches Up to 200kHz , the process is complete.This AC/DC converter is designed for use within the range of 8V~15V supply voltage (Vcc/Vdd).It has a total of 5 terminations.On the ac/dc converter, there are 5 pins.There are 5 pins in the ac-dc converter.It is suitable for mounting by Through Hole .A member of the VIPER? manufacturer family, it has the following characteristics.Similar acdc converters can be found using the VIPER100 family.There are 1 outputs to be processed.Switching Regulator or Controllers includes the ac to dc conversions.It has been set to 3A for the output current.Its output voltage amounts to 620V .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 200kHz .By setting the maximum value to 125°C , stability is ensured.Temperatures below [25°C are not allowed to be used on this isolated switch.In the state of 12mA , AC to DC converter consumes quiescent current.
VIPER100 Features
Packaged with Pentawatt-5 HV (Bent and Staggered Leads)
Switching Frequency at Up to 200kHz
With 5 pins
Output Current at 3A
VIPER100 Applications
There are a lot of STMicroelectronics VIPER100 AC DC Converters applications.
- Standby and Auxiliary Power Supplies
- Cellular phone chargers
- 3.3V power supplies
- AC/DC Adaptors/Chargers for E-books
- Battery chargers for cordless
- Air conditioners
- Auxiliary Power Supplies
- Power adapters for monitors
- Set-top boxes
- Battery Chargers
