VIPER100A-22-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | Pentawatt-5 HV (Bent and Staggered Leads) |
| Number of Pins | 5 |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -25°C |
| Power (Watts) | 100W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 82W |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Frequency | 200kHz |
| Base Part Number | VIPER100 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 4.5V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 12mA |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Max Supply Current | 16mA |
| Quiescent Current | 12mA |
| Control Features | EN, Frequency Control, Soft Start |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 50 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 11V |
| Height | 9.2mm |
| Length | 10.4mm |
| Width | 4.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER100A-22-E Overview
A ac to dc converter of the package Pentawatt-5 HV (Bent and Staggered Leads) contains the ac to dc converter.It is available in Tube AC/DC power converter.Surface Mount mounts this AC/DC converter.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.In this AC to DC transformer, the switching frequency is Up to 200kHz .A range of 8V~15V supply voltages (Vcc/Vdd) can be used.There have been 5 terminations of this program.The ac/dc converter has a total of 5 pins.There are 5 pins in the ac-dc converter.Through Hole are the recommended mounting method for the ac dc converters.The AC to DC converter belongs to the manufacturer family of VIPER? .A similar acdc converter can be searched by using the VIPER100 family.A total of 1 outputs are to be processed.Switching Regulator or Controllers contains the ac to dc conversions.There is 3A output current set.The voltage output by this AC/DC converter is 4.5V .When operating at a frequency of 200kHz , AC to DC converter is capable of reaching high efficiency.You can read the standard of REACH SVHC : No SVHC .There is a maximum supply current of 16mA that AC to DC converter can handle.Using 125°C as the maximum ensures that the AC to DC power converter operates in a stable manner.Temperatures below [-25°C are not allowed to be used on this isolated switch.The AC to DC power supply consumes quiescent current at 12mA .
VIPER100A-22-E Features
Packaged with Pentawatt-5 HV (Bent and Staggered Leads)
Switching Frequency at Up to 200kHz
With 5 pins
Output Current at 3A
VIPER100A-22-E Applications
There are a lot of STMicroelectronics VIPER100A-22-E AC DC Converters applications.
- Charger
- Adapter/Charger for Cordless Phones
- AC-DC Output Power Conversion Applications
- 3.3V power supplies
- Industrial controls
- Chargers for cell/cordless phones
- SMPS house keeping power supplies
- Humidifier
- Z-Wave
- AC?DC USB chargers for Cameras
