VIPER100A-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | Pentawatt-5 HV (Bent and Staggered Leads) |
| Number of Pins | 5 |
| Weight | 4.535924g |
| Manufacturer Package Identifier | Pentawatt HV-P023H3 |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | 25°C |
| Power (Watts) | 100W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 82W |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Frequency | 200kHz |
| Base Part Number | VIPER100 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 12mA |
| Power Dissipation | 82W |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Max Supply Current | 16mA |
| Quiescent Current | 12mA |
| Control Features | EN, Frequency Control, Soft Start |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 200kHz |
| Max Input Voltage | 230V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Nominal Input Voltage | 13V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 12 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Max Input Voltage (AC) | 230V |
| Height | 20.3mm |
| Length | 10.4mm |
| Width | 4.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER100A-E Overview
In the Pentawatt-5 HV (Bent and Staggered Leads) package, the ac to dc converter is embedded.In Tube case, the ac dc converter is available.A AC/DC converter of this type is mounted in the way of Surface Mount .Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.When the switching frequency reaches Up to 200kHz , the process is complete.The voltage range of the supply can be set to 8V~15V (Vcc/Vdd).In total, there are 5 terminations.On this ac/dc converter, there are 5 pins.Up to 5 pins are present on the ac-dc converter.Through Hole is a suitable mounting point for the ac dc converters.It belongs to the family of VIPER? manufacturers.You can search similar acdc converters based on VIPER100 family.A total of 1 outputs are to be processed.The ac to dc conversions are included in Switching Regulator or Controllers .There is 3A output current set.There is 700V voltage output from it.This power AC DC is capable of reaching high efficiency when operating at a frequency of 200kHz .It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 230V voltage.There is a maximum current limAC to DC converter of 16mA for the supply.A AC to DC power converter's input voltage (AC) should not exceed 230V .By setting the maximum value to 125°C , stability is ensured.This isolated switch's minimum working temperature must not be less than 25°C .When the current is at 12mA , AC to DC converter consumes quiescent current.
VIPER100A-E Features
Packaged with Pentawatt-5 HV (Bent and Staggered Leads)
Switching Frequency at Up to 200kHz
With 5 pins
Output Current at 3A
VIPER100A-E Applications
There are a lot of STMicroelectronics VIPER100A-E AC DC Converters applications.
- Set-top boxes
- ATX/BTX Auxiliary Power
- Adaptors for Portable Media Player
- AC/DC Adaptors/Chargers for Cordless Phone
- AC?DC USB chargers for Tablets
- Shaver Charger
- Replaces linear transformers
- Low power ac?dc Adapters for Chargers
- Cellular phone chargers
- Power Adaptors
