VIPER12ADIP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TC |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 13W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 8W |
| Technology | MOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Frequency | 66kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VIPER12 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 38V |
| Input Voltage-Nom | 18V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 9V~38V |
| Input Voltage (Min) | 9V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 60kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Output Isolation | Non-Isolated |
| Voltage - Breakdown | 730V |
| Voltage - Start Up | 14.5V |
| Height Seated (Max) | 5.33mm |
| Length | 9.27mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
VIPER12ADIP Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .The AC/DC power converter is available in Tube .Through Hole is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TC in order to ensure its performance.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.At this point, the switching frequency reaches 60kHz .A range of 9V~38V supply voltages (Vcc/Vdd) can be used.As a result, it has a total of 8 terminations.In this ac/dc converter, there are 8 pins.The pins of the ac-dc converter total to 8 .Suitable mounting is provided by Through Hole .It belongs to the family of VIPER? manufacturers.A similar acdc converter can be searched by using the VIPER12 family.The number of outputs to run is 1 .The following ac to dc conversions are contained in Switching Regulator or Controllers .Its output voltage amounts to 38V .The power AC DC is capable of high efficiency when operated at a frequency of 66kHz .
VIPER12ADIP Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 60kHz
With 8 pins
VIPER12ADIP Applications
There are a lot of STMicroelectronics VIPER12ADIP AC DC Converters applications.
- Low power ac?dc Adapters for Chargers
- 3.3V power supplies
- Power Adaptors
- ATX/BTX Auxiliary Power
- Networking
- USB-PD 2.0
- Universal Off-Line Power Supplies
- Open Frame Switching Power Supply
- ZigBee
- Battery Chargers
