VIPER12ADIP-E
| Parameters | |
|---|---|
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 18V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 16 % |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 14.5V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 2.92mm |
| Length | 9.02mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~150°C TC |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power (Watts) | 13W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 13W |
| Max Power Dissipation | 8W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Current Rating | 5mA |
| Frequency | 60kHz |
| Base Part Number | VIPER12 |
| Pin Count | 8 |
| Output Voltage | 730V |
| Input Voltage-Nom | 18V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 4.5mA |
| Voltage - Supply (Vcc/Vdd) | 9V~38V |
| Max Supply Current | 4.5mA |
| Output Power | 8W |
| Min Input Voltage | 195V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 265V |
VIPER12ADIP-E Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .There is a AC/DC power converter of Tube available.Through Hole mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TC °C in order to achieve its full performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.A range of 9V~38V supply voltages (Vcc/Vdd) can be used.As a result, it has a total of 8 terminations.On the ac/dc converter, there are 8 pins.A total of 8 pins are present on the ac-dc converter.Surface Mount, Through Hole is the recommended mounting method for the ac dc converters.This AC to DC converter belongs to the VIPER? family of manufacturers.It is possible to search for similar acdc converters by using the VIPER12 family.AC to DC converter is included in Switching Regulator or Controllers .The voltage output by this AC/DC converter is 730V .A high efficiency can be achieved by operating at a frequency of 60kHz .In the following link, you will find the REACH SVHC standard: Unknown .There is a possibility of powering the AC to DC converter under a voltage of 265V .Coverters generate 8W in terms of output power.An input voltage of less than 195V volts can be used with the AC to DC inverter.AC to DC converter is capable of handling a maximum supply current of 4.5mA A.The AC to DC power converter's input voltage (AC) should be below 265V .There are 1 channels.
VIPER12ADIP-E Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
With 1 channels on it
VIPER12ADIP-E Applications
There are a lot of STMicroelectronics VIPER12ADIP-E AC DC Converters applications.
- Automotive Clusters
- AC/DC Adaptors/Chargers for Cell Phones
- Small off-line low voltage power supplies
- Replacements for bulky plug-in transformers
- Auxiliary Power Supplies
- Set Top Boxes (STB)
- Set -Top Box (STB) Power Supply
- Adapter/Charger for Cordless Phones
- AC/DC LED Driver applications
- Standby Power Supplies
