banner_page

VIPER12AS-E

8 Terminations9V~38V 8 Pin VIPER12 AC to DC power converterVIPER? Series


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VIPER12AS-E
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 824
  • Description: 8 Terminations9V~38V 8 Pin VIPER12 AC to DC power converterVIPER? Series (Kg)

Details

Tags

Parameters
Subcategory Switching Regulator or Controllers
Power Rating 5W
Max Power Dissipation 8W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Frequency 60kHz
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number VIPER12
Pin Count 8
Output Voltage 730V
Input Voltage-Nom 18V
Number of Channels 1
Analog IC - Other Type SWITCHING REGULATOR
Operating Supply Current 4.5mA
Voltage - Supply (Vcc/Vdd) 9V~38V
Max Supply Current 5mA
Output Power 5W
Topology Flyback
Min Input Voltage 85V
Control Mode CURRENT-MODE
Max Input Voltage 265V
Control Technique PULSE WIDTH MODULATION
Nominal Input Voltage 38V
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Temperature, Over Voltage
Max Duty Cycle 16 %
Drain to Source Resistance 27Ohm
Output Isolation Non-Isolated
Voltage - Start Up 14.5V
Height 1.75mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 months ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 540.001716mg
Operating Temperature -40°C~150°C TC
Packaging Tube
Series VIPER™
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99

VIPER12AS-E Overview


8-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.The AC/DC power converter is available in Tube .There is a mounting point for this AC/DC converter in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TC °C in order for it to perform properly.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .A range of 9V~38V supply voltages (Vcc/Vdd) can be used.There have been 8 terminations of this program.In this ac/dc converter, there are 8 pins.The ac-dc converter has 8 pins.The ac dc converters are suitable for mounting by Surface Mount .This AC to DC converter belongs to the VIPER? family of manufacturers.You can search similar acdc converters based on VIPER12 family.The ac to dc conversions can be found in Switching Regulator or Controllers .It produces a voltage of 730V .The power AC DC is capable of high efficiency when operated at a frequency of 60kHz .SVHC for REACH can be found in the standard No SVHC .Input voltages under 265V can be used to power the AC to DC converter.A coverter produces 5W watts of output power.The AC to DC inverter may be operated with an input voltage less than 85V volts.There is a maximum current limAC to DC converter of 5mA for the supply.1 channels are currently available.

VIPER12AS-E Features


Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
With 1 channels on it

VIPER12AS-E Applications


There are a lot of STMicroelectronics VIPER12AS-E AC DC Converters applications.

  • Charger
  • Power Adaptors
  • Auxiliary Power Supplies
  • Low power ac?dc Adapters for Chargers
  • SMPS house keeping power supplies
  • DVD players
  • Wireless System
  • MPS parts
  • Switching AC-DC Adapter
  • Battery chargers for cellular phones

Write a review

Note: HTML is not translated!
    Bad           Good