VIPER16HD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 10W |
| Max Power Dissipation | 10W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VIPER16 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 800V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1.5mA |
| Output Current | 420mA |
| Voltage - Supply (Vcc/Vdd) | 11.5V~23.5V |
| Output Power | 12W |
| Topology | Buck, Buck-Boost, Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 115kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 80 % |
| Duty Cycle | 70% |
| Output Isolation | Either |
| Voltage - Start Up | 13V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER16HD Overview
There is a ac to dc converter embedded in package 16-SOIC (0.154, 3.90mm Width) .The ac dc converter is available in Tube case.There is a mounting point for this AC/DC converter in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.The switching frequency reaches 115kHz .Supply voltage (Vcc/Vdd) does not need to exceed 11.5V~23.5V .There have been 16 terminations of this program.The ac/dc converter has 16 pins.In this ac-dc converter, there are 16 pins.There are no problem mounting the ac dc converters by Surface Mount .This AC to DC converter belongs to the VIPer? plus manufacturer family.Based on the VIPER16 family, you can search for similar acdc converters.There are 1 outputs to run.Switching Regulator or Controllers contains the ac to dc conversions.The output current is set to 420mA .There is 800V output voltage from this AC/DC converter.You may read the REACH SVHC standard at No SVHC .Input voltage for the AC to DC converter is available under 265V .Coverters generate 12W as their output power.The AC to DC inverter may be operated with an input voltage less than 85V volts.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
VIPER16HD Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 115kHz
With 16 pins
Output Current at 420mA
VIPER16HD Applications
There are a lot of STMicroelectronics VIPER16HD AC DC Converters applications.
- Adaptors for DSCs
- Portable Apparatus
- Replacements for bulky plug-in transformers
- LED lights
- Standby power
- Power Adaptors
- Cellular phone chargers
- Replaces linear transformers
- Linear Adapter Replacements
- Wall switches
