VIPER16HN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 10W |
| Max Power Dissipation | 10W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | VIPER16 |
| Pin Count | 7 |
| Output Voltage | 800V |
| Input Voltage-Nom | 14V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 1.5mA |
| Output Current | 420mA |
| Voltage - Supply (Vcc/Vdd) | 11.5V~23.5V |
| Max Supply Current | 1.5mA |
| Output Power | 12W |
| Topology | Buck, Buck-Boost, Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 115kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 80 % |
| Duty Cycle | 70% |
| Output Isolation | Either |
| Voltage - Start Up | 13V |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER16HN Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .As you can see, this AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .SWITCHING REGULATOR analog ICs are employed in this AC DC converter.When the switching frequency reaches 115kHz , the circuit is closed.As long as the supply voltage (Vcc/Vdd) is within the range of 11.5V~23.5V , the AC/DC converter may be used.There are a total of 7 terminations in it.The ac/dc converter has 7 pins.There are 7 pins on the ac-dc converter.There are no problem mounting the ac dc converters by Through Hole .Currently, it is acdc converter of the manufacturer family of VIPer? plus .You can search similar acdc converters based on VIPER16 family.The ac to dc conversions can be found in Switching Regulator or Controllers .AC to DC converter is set to 420mA for the output current.As a result, its output voltage is 800V .You can read the standard of REACH SVHC : No SVHC .The AC to DC converter can be powered from the input voltage under 265V .Coverters generate 12W as their output power.A voltage of less than 85V V can be used with the AC to DC inverter.The maximum supply current AC to DC converter can handle is 1.5mA .1 channels are currently available.
VIPER16HN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 115kHz
With 7 pins
Output Current at 420mA
With 1 channels on it
VIPER16HN Applications
There are a lot of STMicroelectronics VIPER16HN AC DC Converters applications.
- ATX/BTX Auxiliary Power
- Humidifier
- Handheld/Battery-Powered Systems
- AC--DC Adapter
- Networking
- Appliance Power Supplies
- Digital cameras
- Standby Power Supply
- Cleaners
- AC/DC Adaptors/Chargers for Cordless Phone
