VIPER16LD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 10W |
| Max Power Dissipation | 10W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VIPER16 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 800V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 1.5mA |
| Output Current | 420mA |
| Voltage - Supply (Vcc/Vdd) | 11.5V~23.5V |
| Output Power | 12W |
| Topology | Buck, Buck-Boost, Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 60kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 80 % |
| Duty Cycle | 70% |
| Output Isolation | Either |
| Voltage - Start Up | 13V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 1.5mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VIPER16LD Overview
A ac to dc converter of the package 16-SOIC (0.154, 3.90mm Width) contains the ac to dc converter.The AC/DC power converter type is Tube .In this case, the AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.When the switching frequency reaches 60kHz , the process is complete.Vcc/Vdd can be used within the range of 11.5V~23.5V supply voltage.As a result, it has had 16 terminations.On the ac/dc converter, there are 16 pins.The pins of the ac-dc converter count up to 16 .There are no problem mounting the ac dc converters by Surface Mount .It is a member of VIPer? plus manufacturer family.You can search similar acdc converters based on VIPER16 family.There are 1 outputs to be processed.The ac to dc conversions can be found in Switching Regulator or Controllers .The output current is set to 420mA .In this AC to DC transformer, the output voltage is 800V .Here is the standard for REACH SVHC : No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.The output power of a coverter is assumed to be 12W .The AC to DC inverter can be used with an input voltage of less than 85V V.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
VIPER16LD Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 60kHz
With 16 pins
Output Current at 420mA
VIPER16LD Applications
There are a lot of STMicroelectronics VIPER16LD AC DC Converters applications.
- Battery chargers for media tablets
- USB type-c v1.2 chargers with optional VDM
- AC--DC Adapter
- Lighting controls
- Consumer electronics
- Open Frame Switching Power Supply
- White goods
- AC/DC Adaptors/Chargers for E-books
- Battery Chargers
- Battery chargers for cellular phones
