Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 16-SOIC (0.154, 3.90mm Width) |
Number of Pins | 16 |
Operating Temperature | -40°C~150°C TJ |
Packaging | Tape & Reel (TR) |
Series | VIPer™ plus |
JESD-609 Code | e4 |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 16 |
ECCN Code | EAR99 |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory | Switching Regulator or Controllers |
Power Rating | 5W |
Max Power Dissipation | 10W |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Time@Peak Reflow Temperature-Max (s) | 30 |
Base Part Number | VIPER16 |
Pin Count | 16 |
Output Voltage | 800V |
Input Voltage-Nom | 14V |
Number of Channels | 1 |
Analog IC - Other Type | SWITCHING REGULATOR |
Nominal Supply Current | 1.5mA |
Output Current | 420mA |
Voltage - Supply (Vcc/Vdd) | 11.5V~23.5V |
Max Supply Current | 1.5mA |
Output Power | 12W |
Topology | Buck, Buck-Boost, Flyback |
Control Mode | CURRENT-MODE |
Frequency - Switching | 60kHz |
Input Voltage (Max) | 23.5V |
Control Technique | PULSE WIDTH MODULATION |
Internal Switch(s) | Yes |
Fault Protection | Current Limiting, Over Temperature |
Max Duty Cycle | 80 % |
Duty Cycle | 70% |
Output Isolation | Either |
Voltage - Start Up | 13V |
Length | 10mm |
Width | 3.9mm |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The VIPER16LDTR is an off-line converter with an 800 V avalanche ruggedness power section, a PWM controller, user-defined overcurrent limit, protection against feedback network disconnection, hysteretic thermal protection, soft start-up, and safe auto restart after any fault condition. The VIPER16LDTR is able to power itself directly from the rectified mains, eliminating the need for an auxiliary bias winding. Advance frequency jittering reduces EMI filter costs. Burst mode operation and the device's very low consumption both help to meet the standard set by energy-saving regulations.
800 V avalanche rugged power section
PWM operation with frequency jittering for low EMI
No need for auxiliary winding for low-power application
Standby power < 30 mW at 230 VAC
Limiting current with adjustable set point
On-board soft-start
Safe auto-restart after a fault condition
Hysteretic thermal shutdown
Replacement of capacitive power supply
Auxiliary power supply for appliances,
Power metering
LED drivers