VIPER16LN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 10W |
| Max Power Dissipation | 10W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | VIPER16 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 800V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 1.5mA |
| Output Current | 420mA |
| Voltage - Supply (Vcc/Vdd) | 11.5V~23.5V |
| Max Supply Current | 1.5mA |
| Output Power | 12W |
| Topology | Buck, Buck-Boost, Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 60kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 80 % |
| Duty Cycle | 70% |
| Output Isolation | Either |
| Voltage - Start Up | 13V |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER16LN Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.There is a AC/DC power converter of Tube available.Through Hole is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.Switching frequency reaches 60kHz Hz.Supply voltage (Vcc/Vdd) does not need to exceed 11.5V~23.5V .There are a total of 7 terminations.In this ac/dc converter, there are 7 pins.There are 7 pins on the ac-dc converter.There are no problem mounting the ac dc converters by Through Hole .Currently, it is acdc converter of the manufacturer family of VIPer? plus .A similar acdc converter can be searched by using the VIPER16 family.A total of 1 outputs are available for processing.The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter is set to 420mA for the output current.There is 800V voltage output from it.You can read the standard for REACH SVHC at: No SVHC .The AC to DC converter can be powered from the input voltage under 265V .12W is the output power of a coverter.An input voltage of less than 85V V is required to operate the AC to DC inverter.There is a maximum current limAC to DC converter of 1.5mA for the supply.
VIPER16LN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 60kHz
With 7 pins
Output Current at 420mA
VIPER16LN Applications
There are a lot of STMicroelectronics VIPER16LN AC DC Converters applications.
- DVD players
- Battery Chargers
- WiFi Wireless
- White goods
- Laptops
- AC/DC Adaptors/Chargers for Cordless Phone
- AC/DC Adaptors/Chargers for E-books
- IoT Applications
- Portable Apparatus
- Standby power supplies for IR
