Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPer™ plus |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
10W |
Max Power Dissipation |
10W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Base Part Number |
VIPER17 |
Pin Count |
16 |
Number of Outputs |
1 |
Output Voltage |
800V |
Input Voltage-Nom |
10V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
25mA |
Nominal Supply Current |
1.8mA |
Output Current |
420mA |
Voltage - Supply (Vcc/Vdd) |
8.5V~23.5V |
Max Supply Current |
1.8mA |
Output Power |
10W |
Topology |
Flyback |
Min Input Voltage |
85V |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
115kHz |
Max Input Voltage |
265V |
Control Technique |
PULSE WIDTH MODULATION |
Nominal Input Voltage |
265V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Temperature, Over Voltage |
Max Duty Cycle |
80 % |
Duty Cycle |
70% |
Output Isolation |
Isolated |
Voltage - Start Up |
14V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Height |
1.47mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VIPER17HD Overview
A ac to dc converter of the package 16-SOIC (0.154, 3.90mm Width) contains the ac to dc converter.Tube case is available for the ac dc converter.As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.There is 115kHz switching frequency.The voltage range of the supply can be set to 8.5V~23.5V (Vcc/Vdd).Total terminations are 16 .Approximately 16 pins are present on the ac/dc converter.Up to 16 pins are present on the ac-dc converter.Surface Mount is a suitable mounting point for the ac dc converters.This AC to DC converter belongs to the VIPer? plus manufacturer family.Similar acdc converters can be found using the VIPER17 family.There are 1 outputs to be processed.The ac to dc conversions are included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 420mA .There is 800V voltage output from it.Here is the standard for REACH SVHC : No SVHC .Input voltage for the AC to DC converter is available under 265V .Coverters generate 10W in terms of output power.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.Approximately 1.8mA amps of supply current can be handled by the power AC DC.The AC to DC power converter's input voltage (AC) should be below 265V .
VIPER17HD Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 115kHz
With 16 pins
Output Current at 420mA
VIPER17HD Applications
There are a lot of STMicroelectronics VIPER17HD AC DC Converters applications.
- Charger
- Switching AC-DC Charger
- Adapters for Handheld Electronics
- Standby power supplies for IR
- Replaces linear transformers
- Wireless System
- Adapter/Charger for Cell
- Battery chargers for mobile devices with touchpad display
- Power adapters for network devices
- Switching AC-DC Adapter