Parameters |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 months ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Number of Pins |
7 |
Weight |
850.995985mg |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPer™ plus |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
10W |
Max Power Dissipation |
12W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Base Part Number |
VIPER17 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
800V |
Input Voltage-Nom |
14V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
1.8mA |
Output Current |
420mA |
Voltage - Supply (Vcc/Vdd) |
8.5V~23.5V |
Max Supply Current |
1.8mA |
Output Power |
10W |
Topology |
Flyback |
Min Input Voltage |
85V |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
115kHz |
Max Input Voltage |
265V |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Temperature, Over Voltage |
Max Duty Cycle |
80 % |
Duty Cycle |
70% |
Output Isolation |
Isolated |
Voltage - Breakdown |
800V |
Voltage - Start Up |
14V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Height |
3.3mm |
Length |
9.27mm |
Width |
6.35mm |
Radiation Hardening |
No |
VIPER17HN Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.Through Hole mounts this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .SWITCHING REGULATOR analog ICs are employed in this AC DC converter.115kHz is the switching frequency.The voltage range of the supply can be set to 8.5V~23.5V (Vcc/Vdd).A total of 7 terminations have been recorded.There are 7 pins on the ac/dc converter.There are 8 pins in total.There are no problem mounting the ac dc converters by Through Hole .It belongs to the family of VIPer? plus manufacturers.It is possible to search for similar acdc converters by using the VIPER17 family.Running 1 outputs is available.The ac to dc conversions can be found in Switching Regulator or Controllers .Currently, the output current is set to 420mA .In this AC to DC transformer, the output voltage is 800V .You are able to read the REACH SVHC standard at: No SVHC .Input voltage for the AC to DC converter is available under 265V .Coverters generate 10W as their output power.It is possible to use the AC to DC inverter with an input voltage less than 85V V.AC to DC converter can handle a maximum supply current of 1.8mA .An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.
VIPER17HN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 115kHz
With 7 pins
Output Current at 420mA
VIPER17HN Applications
There are a lot of STMicroelectronics VIPER17HN AC DC Converters applications.
- Industrial controls
- Laptops and personal digital assistants
- Portable audio
- Adapters for Handheld Electronics
- Set Top Boxes (STB)
- AC/DC LED Driver applications
- Automotive Infotainment
- 3.3V power supplies
- RCC SMPS
- Home appliances