VIPER17LD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 1W |
| Max Power Dissipation | 10W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | VIPER17 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 800V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 25mA |
| Nominal Supply Current | 1.8mA |
| Output Current | 420mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Max Supply Current | 1.8mA |
| Output Power | 10W |
| Topology | Flyback |
| Min Input Voltage | 8.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 60kHz |
| Max Input Voltage | 23.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 80 % |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Start Up | 14V |
| Height | 1.47mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER17LD Overview
This ac to dc converter is included in the package 16-SOIC (0.154, 3.90mm Width) .The AC/DC power converter type is Tube .This AC/DC converter is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.As a result, the switching frequency reaches 60kHz .This AC/DC converter is designed for use within the range of 8.5V~23.5V supply voltage (Vcc/Vdd).Total terminations are 16 .Approximately 16 pins are present on the ac/dc converter.There are 16 pins in the ac-dc converter.Suitable mounting is provided by Surface Mount .It belongs to a manufacturer family of VIPer? plus .Based on the VIPER17 family, you can search for similar acdc converters.The number of outputs to run is 1 .The ac to dc conversions are included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 420mA .Its output voltage is800V .You may read the REACH SVHC standard at No SVHC .The AC to DC converter can be powered from the input voltage under 23.5V .10W is the output power of a coverter.If the input voltage is less than 8.5V V, the AC to DC inverter can be used.A maximum supply current of 1.8mA can be handled by this power AC DC.
VIPER17LD Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 60kHz
With 16 pins
Output Current at 420mA
VIPER17LD Applications
There are a lot of STMicroelectronics VIPER17LD AC DC Converters applications.
- Tablets
- Replaces linear transformers
- Adapters
- Replacements for bulky plug-in transformers
- Small off-line low voltage power supplies
- Low-Voltage I/O System Power
- Set -Top Box (STB) Power Supply
- AC/DC Adaptors/Chargers for Cell Phones
- MPS parts
- Standby Power Supply
