Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
VIPer™ plus |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
NICKEL PALLADIUM GOLD |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
1W |
Max Power Dissipation |
12W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VIPER17 |
Pin Count |
16 |
Number of Outputs |
1 |
Output Voltage |
800V |
Input Voltage-Nom |
10V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
1.8mA |
Output Current |
420mA |
Voltage - Supply (Vcc/Vdd) |
8.5V~23.5V |
Output Power |
10W |
Topology |
Flyback |
Min Input Voltage |
8.5V |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
60kHz |
Max Input Voltage |
23.5V |
Control Technique |
PULSE WIDTH MODULATION |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Temperature, Over Voltage |
Max Duty Cycle |
80 % |
Duty Cycle |
70% |
Output Isolation |
Isolated |
Voltage - Breakdown |
800V |
Voltage - Start Up |
14V |
Height |
1.47mm |
Length |
10mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
VIPER17LDTR Overview
The ac to dc converter is embedded in 16-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) case is available for the ac dc converter.A AC/DC converter of this type is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.60kHz is the switching frequency.It can be used within the range of 8.5V~23.5V supply voltage (Vcc/Vdd).In total, it has 16 terminations.Approximately 16 pins are present on the ac/dc converter.The pins of the ac-dc converter count up to 16 .Surface Mount is the recommended mounting method for the ac dc converters.It is a member of VIPer? plus manufacturer family.The VIPER17 family can be used to search for similar acdc converters.There are 1 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .It has been set to 420mA for the output current.There is 800V output voltage from this AC/DC converter.You are able to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 23.5V voltage.There is 10W output power generated by a coverter.It is possible to operate the AC to DC inverter with an input voltage that is less than 8.5V V.
VIPER17LDTR Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 60kHz
With 16 pins
Output Current at 420mA
VIPER17LDTR Applications
There are a lot of STMicroelectronics VIPER17LDTR AC DC Converters applications.
- AC?DC USB chargers for Cameras
- Power adapters for monitors
- AC/DC Adaptors/Chargers for E-books
- Home Appliance Applications
- Smartphones
- Automotive Clusters
- Air conditioners
- Utility meters
- AC-DC Output Power Conversion Applications
- Laptops