VIPER17LN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 10W |
| Max Power Dissipation | 12W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Base Part Number | VIPER17 |
| Pin Count | 8 |
| Output Voltage | 800V |
| Input Voltage-Nom | 14V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 1.8mA |
| Output Current | 420mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Max Supply Current | 1.8mA |
| Output Power | 10W |
| Topology | Flyback |
| Min Input Voltage | 8.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 60kHz |
| Max Input Voltage | 23.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 80 % |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 14V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER17LN Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.The AC/DC power converter Tube is available for this product.As you can see, this AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.When the switching frequency reaches 60kHz , the circuit is closed.Supply voltage (Vcc/Vdd) does not need to exceed 8.5V~23.5V .In total, it has 7 terminations.On the ac/dc converter, there are 7 pins.The pins of the ac-dc converter count up to 8 .There are no problem mounting the ac dc converters by Through Hole .This AC to DC converter belongs to the VIPer? plus family of manufacturers.It is possible to search for similar acdc converters by using the VIPER17 family.The ac to dc conversions can be found in Switching Regulator or Controllers .Currently, the output current is set to 420mA .There is 800V voltage output from it.It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter input voltage can be powered under 23.5V .In the AC to DC transformer of a coverter, the output power is 10W .It is possible to operate the AC to DC inverter with an input voltage that is less than 8.5V V.AC to DC converter can handle a maximum supply current of 1.8mA .The AC to DC power converter's input voltage (AC) should be below 265V .Currently, there are 1 channels available.
VIPER17LN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 60kHz
With 7 pins
Output Current at 420mA
With 1 channels on it
VIPER17LN Applications
There are a lot of STMicroelectronics VIPER17LN AC DC Converters applications.
- Standby Power Supplies
- Portable audio
- Standby power supplies for TV
- SMPS house keeping power supplies
- Auxiliary Power Supplies
- AC/DC LED Driver applications
- Replaces linear transformers
- Power adapters for monitors
- Low-Voltage I/O System Power
- Home Appliance Applications
