VIPER20-E
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VIPER20 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 620V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Power Dissipation | 57W |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 200kHz |
| Max Input Voltage | 230V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | Pentawatt-5 HV (Bent and Staggered Leads) |
| Number of Pins | 5 |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | 25°C |
| Power (Watts) | 20W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 57W |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
VIPER20-E Overview
A ac to dc converter of the package Pentawatt-5 HV (Bent and Staggered Leads) contains the ac to dc converter.The ac dc converter is available in Tube case.The AC/DC converter is mounted in the way of Surface Mount .This AC DC converter employs SWITCHING REGULATOR analog IC type.The switching frequency reaches Up to 200kHz .Supply voltage (Vcc/Vdd) does not need to exceed 8V~15V .There are a total of 5 terminations in it.Approximately 5 pins are present on the ac/dc converter.Up to 5 pins are present on the ac-dc converter.Suitable mounting is provided by Through Hole .The product is acdc converter of the VIPER? manufacturer family.If you select the VIPER20 family, you will be able to search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.Switching Regulator or Controllers includes the ac to dc conversions.500mA is set as the output current.There is 620V voltage output from it.It is possible to read the REACH SVHC standard at: No SVHC .An input voltage of 230V is available for powering the AC to DC converter.When 125°C is set to the maximum, the AC to DC power converter will run continuously.Temperatures below 25°C are not permitted for this isolated switch.
VIPER20-E Features
Packaged with Pentawatt-5 HV (Bent and Staggered Leads)
Switching Frequency at Up to 200kHz
With 5 pins
Output Current at 500mA
VIPER20-E Applications
There are a lot of STMicroelectronics VIPER20-E AC DC Converters applications.
- Set -Top Box (STB) Power Supply
- Linear Adapter Replacements
- Cellular phone chargers
- Rice Cooker
- Chargers for cell/cordless phones
- Standby Power Supply
- Portable audio
- Battery chargers for media tablets
- 3.3V power supplies
- Shaver Charger
