VIPER20A-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 HV (Bent and Staggered Leads) |
| Number of Pins | 5 |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | 25°C |
| Power (Watts) | 20W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 57W |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Frequency | 200kHz |
| Base Part Number | VIPER20 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 13mA |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Max Supply Current | 16mA |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 50 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER20A-E Overview
There is a ac to dc converter embedded in package Pentawatt-5 HV (Bent and Staggered Leads) .It is available in Tube AC/DC power converter.There is a mounting point for this AC/DC converter in the way of Through Hole .SWITCHING REGULATOR analog ICs are employed in this AC DC converter.Up to 200kHz is the switching frequency.It can be used within the range of 8V~15V supply voltage (Vcc/Vdd).A total of 5 terminations have been recorded.There are 5 pins on this ac/dc converter.There are 5 pins on the ac-dc converter.Through Hole are the recommended mounting method for the ac dc converters.It is a member of VIPER? manufacturer family.Search similar acdc converters based on VIPER20 family members.A total of 1 outputs need to be run.AC to DC converter is included in Switching Regulator or Controllers .Currently, the output current is set to 500mA .Its output voltage amounts to 700V .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 200kHz .A maximum supply current of 16mA can be handled by this power AC DC.The maximum 125°C ensures that the AC to DC power converter is stable.A minimum working temperature of 25°C must be maintained for this isolated switch.
VIPER20A-E Features
Packaged with Pentawatt-5 HV (Bent and Staggered Leads)
Switching Frequency at Up to 200kHz
With 5 pins
Output Current at 500mA
VIPER20A-E Applications
There are a lot of STMicroelectronics VIPER20A-E AC DC Converters applications.
- Standby Power Supplies
- Standby power supplies for IR
- Battery chargers for cellular phones
- AC?DC USB chargers for Cameras
- Standby Power Supplies
- Air conditioners
- AC/DC Adaptors/Chargers for Cell Phones
- Battery chargers for media tablets
- Tablets
- AC--DC Adapter
