VIPER20ASP-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | 25°C |
| Power (Watts) | 20W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 57W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Frequency | 200kHz |
| Base Part Number | VIPER20 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Max Supply Current | 16mA |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 12 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER20ASP-E Overview
In the PowerSO-10 Exposed Bottom Pad package, the ac to dc converter is embedded.Tube case is available for the ac dc converter.A AC/DC converter of this type is mounted in the way of Surface Mount .The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.At this point, the switching frequency reaches Up to 200kHz .The voltage range of the supply can be set to 8V~15V (Vcc/Vdd).As a result, it has a total of 10 terminations.Approximately 10 pins are present on the ac/dc converter.There are 10 pins on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .The product is acdc converter of the VIPER? manufacturer family.Similar acdc converters can be found using the VIPER20 family.There are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .Current output is set to 500mA .The voltage output by this AC/DC converter is 700V .AC to DC converter reaches high efficiency when operated at a frequency of 200kHz .AC to DC converter is capable of handling a maximum supply current of 16mA A.The maximum 125°C ensures that the AC to DC power converter runs stablily.Temperatures below [25°C are not allowed to be used on this isolated switch.
VIPER20ASP-E Features
Packaged with PowerSO-10 Exposed Bottom Pad
Switching Frequency at Up to 200kHz
With 10 pins
Output Current at 500mA
VIPER20ASP-E Applications
There are a lot of STMicroelectronics VIPER20ASP-E AC DC Converters applications.
- Replaces linear transformers
- AC?DC USB chargers for Tablets
- Lighting controls
- Standby power supplies for TV
- MP3
- Switching AC-DC Charger
- RCC SMPS
- Adapters for Handheld Electronics
- Tablets
- DVD players
