Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Packaging |
Tube |
Series |
VIPER™ |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
MATTE TIN |
Max Operating Temperature |
125°C |
Min Operating Temperature |
25°C |
Power (Watts) |
20W |
Subcategory |
Switching Regulator or Controllers |
Max Power Dissipation |
57W |
Technology |
MOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Frequency |
200kHz |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
VIPER20 |
Pin Count |
8 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Output Voltage |
620V |
Input Voltage-Nom |
13V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
8V~15V |
Input Voltage (Min) |
9V |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
Up to 200kHz |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
50ns |
Fall Time (Typ) |
100 ns |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Temperature |
Output Isolation |
Isolated |
Voltage - Start Up |
11V |
Height Seated (Max) |
5.33mm |
Length |
9.27mm |
Width |
7.62mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VIPER20DIP-E Overview
In the 8-DIP (0.300, 7.62mm) package, the ac to dc converter is embedded.The AC/DC power converter is available in Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.Up to 200kHz is the switching frequency.As long as the supply voltage (Vcc/Vdd) is within the range of 8V~15V , the AC/DC converter may be used.There are a total of 8 terminations.There are 8 pins on the ac/dc converter.The ac-dc converter has 8 pins.There are no problem mounting the ac dc converters by Through Hole .It belongs to the family of VIPER? manufacturers.The VIPER20 family can be used to search for similar acdc converters.There are 1 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .There is 500mA output current set.There is 620V voltage output from it.AC to DC converter is able to reach high efficiency when its frequency is 200kHz .By setting the maximum value to 125°C , stability is ensured.Temperatures below 25°C degrees Celsius are not permitted for this isolated switch.
VIPER20DIP-E Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 200kHz
With 8 pins
Output Current at 500mA
VIPER20DIP-E Applications
There are a lot of STMicroelectronics VIPER20DIP-E AC DC Converters applications.
- Consumer electronics
- Smartphones
- USB-PD 2.0
- Wireless System
- Automotive Clusters
- Small off-line low voltage power supplies
- Standby Power Supply
- Battery chargers for mobile devices with touchpad display
- AC?DC USB chargers for Tablets
- Power Adaptors