VIPER22ADIP-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~150°C TC |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 20W |
| Max Power Dissipation | 12W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 60kHz |
| Base Part Number | VIPER22 |
| Pin Count | 8 |
| Output Voltage | 730V |
| Input Voltage-Nom | 18V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 4.5mA |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | 8V~38V |
| Max Supply Current | 5mA |
| Output Power | 12W |
| Topology | Flyback |
| Min Input Voltage | 195V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Threshold Voltage | 16V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 16 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 14.5V |
| Min Input Voltage (AC) | 195V |
| Max Input Voltage (AC) | 265V |
| Height | 2.92mm |
| Length | 9.02mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER22ADIP-E Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .The ac dc converter is available in Tube case.As you can see, this AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TC °C so that it can deliver its performance.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.As long as the supply voltage (Vcc/Vdd) is within the range of 8V~38V , the AC/DC converter may be used.There have been 8 terminations of this program.A ac/dc converter with 8 pins is available.The pins of the ac-dc converter total to 8 .Surface Mount, Through Hole is a suitable mounting point for the ac dc converters.It belongs to the family of VIPER? manufacturers.Search similar acdc converters based on VIPER22 family members.The ac to dc conversions are included in Switching Regulator or Controllers .We have set the output current to 700mA .As a result, its output voltage is 730V .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 60kHz .In the following link, you will find the REACH SVHC standard: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .It is assumed that a coverter generates 12W as its output power.A voltage of less than 195V V can be used with the AC to DC inverter.There is a maximum current limAC to DC converter of 5mA for the supply.AC to DC power converters should be able to accept input voltages (AC) below 265V .A total of 1 channels exist.
VIPER22ADIP-E Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 700mA
With 1 channels on it
VIPER22ADIP-E Applications
There are a lot of STMicroelectronics VIPER22ADIP-E AC DC Converters applications.
- SMPS house keeping power supplies
- Adaptors for Portable Media Player
- USB type-c v1.2 chargers with optional VDM
- Digital cameras
- Battery chargers for mobile devices with touchpad display
- Standby power supplies for IR
- Auxiliary Power Supplies
- Air Conditioning
- AC/DC Adaptors/Chargers for E-books
- AC/DC LED Driver applications
