VIPER25HD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 1W |
| Max Power Dissipation | 24W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VIPER25 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 3.5mA |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Output Power | 20W |
| Topology | Flyback |
| Min Input Voltage | 8.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 225kHz |
| Max Input Voltage | 23.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Output Isolation | Isolated |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 14V |
| Length | 10mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER25HD Overview
In the 16-SOIC (0.154, 3.90mm Width) package, the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.Surface Mount mounts this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.This AC DC converter employs SWITCHING CONTROLLER analog IC type.There is 225kHz switching frequency.The AC/DC converter is capable of being used when the supply voltage is 8.5V~23.5V (Vcc/Vdd).A total of 16 terminations have been recorded.There are 16 pins on the ac/dc converter.Up to 16 pins are present on the ac-dc converter.There are no problem mounting the ac dc converters by Surface Mount .Currently, it is acdc converter of the manufacturer family of VIPer? plus .Similar acdc converters can be found using the VIPER25 family.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions are included in Switching Regulator or Controllers .Current output is set to 1.5A .You can read the standard of REACH SVHC : No SVHC .It is available to power the AC to DC converter input voltage under 23.5V .20W is the output power of a coverter.It is possible to use the AC to DC inverter with an input voltage less than 8.5V V.
VIPER25HD Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 225kHz
With 16 pins
Output Current at 1.5A
VIPER25HD Applications
There are a lot of STMicroelectronics VIPER25HD AC DC Converters applications.
- White goods
- RCC SMPS
- Records
- Z-Wave
- Appliances
- Battery Chargers
- Adapters for Handheld Electronics
- MPS parts
- Battery chargers for cordless
- ZigBee
