banner_page

VIPER25HDTR

16 Terminations8.5V~23.5V 16 Pin VIPER25 AC to DC power converterVIPer? plus Series 1 Outputs225kHz


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VIPER25HDTR
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 869
  • Description: 16 Terminations8.5V~23.5V 16 Pin VIPER25 AC to DC power converterVIPer? plus Series 1 Outputs225kHz (Kg)

Details

Tags

Parameters
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~150°C TJ
Packaging Digi-Reel®
Series VIPer™ plus
JESD-609 Code e4
Part Status Discontinued
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Subcategory Switching Regulator or Controllers
Power Rating 1W
Max Power Dissipation 24W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Base Part Number VIPER25
Pin Count 16
Number of Outputs 1
Input Voltage-Nom 14V
Analog IC - Other Type SWITCHING CONTROLLER
Nominal Supply Current 3.5mA
Output Current 1.5A
Voltage - Supply (Vcc/Vdd) 8.5V~23.5V
Output Power 20W
Topology Flyback
Min Input Voltage 8.5V
Control Mode CURRENT-MODE
Frequency - Switching 225kHz
Max Input Voltage 23.5V
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Temperature, Over Voltage
Output Isolation Isolated
Voltage - Breakdown 800V
Voltage - Start Up 14V
Length 10mm
Width 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

VIPER25HDTR Overview


In the 16-SOIC (0.154, 3.90mm Width) package, the ac to dc converter is embedded.The ac dc converter is available in Digi-Reel? case.A AC/DC converter of this type is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.When the switching frequency reaches 225kHz , the process is complete.Vcc/Vdd can be used within the range of 8.5V~23.5V supply voltage.There are a total of 16 terminations in it.A ac/dc converter with 16 pins is available.There are 16 pins in the ac-dc converter.Surface Mount is a suitable mounting point for the ac dc converters.Currently, it is acdc converter of the manufacturer family of VIPer? plus .A similar acdc converter can be searched by using the VIPER25 family.The number of outputs to run is 1 .The ac to dc conversions are contained in Switching Regulator or Controllers .There is 1.5A output current set.Here is the standard for REACH SVHC : No SVHC .The AC to DC converter input voltage can be powered under 23.5V .There is 20W output power generated by a coverter.The AC to DC inverter may be operated with an input voltage less than 8.5V volts.

VIPER25HDTR Features


Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 225kHz
With 16 pins
Output Current at 1.5A

VIPER25HDTR Applications


There are a lot of STMicroelectronics VIPER25HDTR AC DC Converters applications.

  • USB-PD 2.0
  • AC?DC USB chargers for Tablets
  • Universal input AC/DC adapters (15W - 45W)
  • Appliances
  • Power tools
  • Adaptors for DSCs
  • White goods
  • Set Top Boxes (STB)
  • 3.3V power supplies
  • Consumer electronics

Write a review

Note: HTML is not translated!
    Bad           Good