VIPER25LD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 24W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VIPER25 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 3.5mA |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Output Power | 20W |
| Input Voltage (Min) | 8.5V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 136kHz |
| Input Voltage (Max) | 23.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Output Isolation | Isolated |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 14V |
| Length | 10mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER25LD Overview
It is embedded in package 16-SOIC (0.154, 3.90mm Width) .The AC/DC power converter type is Tube .It is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.When the switching frequency reaches 136kHz , the process is complete.A range of 8.5V~23.5V supply voltages (Vcc/Vdd) can be used.As a result, it has a total of 16 terminations.The ac/dc converter has a total of 16 pins.There are 16 pins in the ac-dc converter.Surface Mount is the recommended mounting method for the ac dc converters.It is a member of VIPer? plus manufacturer family.You can search similar acdc converters based on VIPER25 family.A total of 1 outputs need to be run.The following ac to dc conversions are contained in Switching Regulator or Controllers .There is 1.5A output current set.Based on a unique technique, it is possible to ensure input voltages with the maximal value of 23.5V .Coverters generate 20W as their output power.
VIPER25LD Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 136kHz
With 16 pins
Output Current at 1.5A
VIPER25LD Applications
There are a lot of STMicroelectronics VIPER25LD AC DC Converters applications.
- AC/DC Adaptors/Chargers for Cordless Phone
- RCC SMPS
- Power adapters for network devices
- Universal input AC/DC adapters (15W - 45W)
- MP3
- Chargers for cell/cordless phones
- Linear Adapter Replacements
- Low-Voltage I/O System Power
- Adapters for Handheld Electronics
- Portable Apparatus
