Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
547.485991mg |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPer™ plus |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
1.5W |
Max Power Dissipation |
20W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
14V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VIPER26 |
Pin Count |
16 |
Number of Outputs |
1 |
Analog IC - Other Type |
ANALOG CIRCUIT |
Operating Supply Current |
600μA |
Output Current |
1A |
Voltage - Supply (Vcc/Vdd) |
11.5V~23.5V |
Topology |
Flyback |
Min Input Voltage |
11.5V |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
115kHz |
Max Input Voltage |
23.5V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Temperature |
Max Duty Cycle |
80 % |
Duty Cycle |
70% |
Output Isolation |
Either |
Voltage - Breakdown |
800V |
Voltage - Start Up |
13V |
Length |
10mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VIPER26HD Overview
This ac to dc converter is included in the package 16-SOIC (0.154, 3.90mm Width) .In Tube AC/DC power converter, it is available.The AC/DC converter is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.An analog IC of type ANALOG CIRCUIT is employed in this AC DC converter.As soon as the switching frequency reaches 115kHz , the circuit is closed.As long as the supply voltage (Vcc/Vdd) is within the range of 11.5V~23.5V , the AC/DC converter may be used.It has a total of 16 terminations.There are 16 pins on this ac/dc converter.The pins of the ac-dc converter count up to 16 .It are possible to mount thare ac dc converters by Surface Mount .The product is acdc converter of the VIPer? plus manufacturer family.Based on the VIPER26 family, you can search for similar acdc converters.There are 1 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .1A is set as the output current.It is possible to read the REACH SVHC standard at: No SVHC .Input voltages under 23.5V can be used to power the AC to DC converter.The AC to DC inverter can be used with an input voltage of less than 11.5V V.It is important to keep this AC to DC converter set to 14V .
VIPER26HD Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 115kHz
With 16 pins
Output Current at 1A
VIPER26HD Applications
There are a lot of STMicroelectronics VIPER26HD AC DC Converters applications.
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Off--line Battery Charger
- Standby Power for General Off-Line Applications
- Adapter/Charger for Cell
- Air conditioners
- WiFi Wireless
- AC/DC Adaptors/Chargers for Cell Phones
- ZigBee
- Automotive Telematics
- AC/DC Adaptors/Chargers for E-books