VIPER26HDTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPer™ plus |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 20W |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | VIPER26 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 23.5V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Voltage - Supply (Vcc/Vdd) | 11.5V~23.5V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 115kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 80 % |
| Max Junction Temperature (Tj) | 150°C |
| Duty Cycle | 70% |
| Output Isolation | Either |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 13V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 1.75mm |
| Length | 10mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER26HDTR Overview
This ac to dc converter is embedded in package 16-SOIC (0.154, 3.90mm Width) .The AC/DC power converter type is Tape & Reel (TR) .As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.The AC DC converter uses a type ANALOG CIRCUIT analog integrated circuit.At this point, the switching frequency reaches 115kHz .It can be used within the range of 11.5V~23.5V supply voltage (Vcc/Vdd).As a result, it has had 16 terminations.There are 16 pins on the ac/dc converter.The pins of the ac-dc converter total to 16 .The ac dc converters is suitable for mounting by Surface Mount .Currently, it is acdc converter of the manufacturer family of VIPer? plus .The VIPER26 family allows you to search for similar acdc converters.There are 1 outputs to run.There are a ac to dc conversions included in Switching Regulator or Controllers .REACH SVHC standard can be found at No SVHC .The AC to DC converter can be powered under 265V voltage.It is possible to use the AC to DC inverter with an input voltage less than 85V V.At all times, this AC to DC converter should be set to 14V .Input voltage (AC) should be below 265V .
VIPER26HDTR Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 115kHz
With 16 pins
VIPER26HDTR Applications
There are a lot of STMicroelectronics VIPER26HDTR AC DC Converters applications.
- Industrial controls
- Universal input AC/DC adapters (15W - 45W)
- Handheld/Battery-Powered Systems
- IoT Applications
- Auxiliary Power Supply
- Wireless System
- Adapters
- Chargers for cell/cordless phones
- Set-top boxes
- Low-Voltage I/O System Power
