VIPER26LN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Power (Watts) | 20W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 10W |
| Max Power Dissipation | 20W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Base Part Number | VIPER26 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 600μA |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 11.5V~23.5V |
| Max Output Voltage | 800V |
| Topology | Flyback |
| Min Input Voltage | 11.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 60kHz |
| Max Input Voltage | 23.5V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 80 % |
| Duty Cycle | 70% |
| Output Isolation | Either |
| Voltage - Start Up | 13V |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 8.26mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER26LN Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .There is a AC/DC power converter of Tube available.Through Hole mounts this AC/DC converter.The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.This AC DC converter employs ANALOG CIRCUIT analog IC type.60kHz is the switching frequency.As long as the supply voltage (Vcc/Vdd) is within the range of 11.5V~23.5V , the AC/DC converter may be used.In total, there are 7 terminations.The ac/dc converter has 7 pins.The pins of the ac-dc converter count up to 7 .It are possible to mount thare ac dc converters by Through Hole .Currently, it is acdc converter of the manufacturer family of VIPer? plus .The VIPER26 family allows you to search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.Switching Regulator or Controllers includes the ac to dc conversions.In this AC to DC transformer, the output current is set to 1A .There is an option to power the AC to DC converter input voltage under 23.5V .The AC to DC inverter may be operated with an input voltage less than 11.5V volts.Keep in mind that this AC to DC converter should always be set to 14V .
VIPER26LN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 60kHz
With 7 pins
Output Current at 1A
VIPER26LN Applications
There are a lot of STMicroelectronics VIPER26LN AC DC Converters applications.
- Battery Chargers
- Charger
- Z-Wave
- Networking
- LED Driver
- Set-top boxes
- Adapter/Charger for Cell
- Battery chargers for mobile devices with touchpad display
- Auxiliary Power Supply
- AC/DC LED Driver applications
