VIPER27HD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 20W |
| Max Power Dissipation | 24W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | VIPER27 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3.5mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Output Power | 20W |
| Topology | Flyback |
| Min Input Voltage | 8.5V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.74A |
| Frequency - Switching | 115kHz |
| Max Input Voltage | 23.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 14V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VIPER27HD Overview
This ac to dc converter is embedded in package 16-SOIC (0.154, 3.90mm Width) .The ac dc converter is available in Tube case.In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.Switching frequency reaches 115kHz Hz.Within the range of 8.5V~23.5V supply voltage (Vcc/Vdd), it can be used.There are a total of 16 terminations in it.On this ac/dc converter, there are 16 pins.There are 16 pins on the ac-dc converter.The ac dc converters are suitable to mount by Surface Mount .The AC to DC converter belongs to the manufacturer family of VIPer? plus .You can search similar acdc converters based on VIPER27 family.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions are included in Switching Regulator or Controllers .Ac to dc inverters can be supplied with a maximum current of 0.74A .REACH SVHC standard can be found at No SVHC .The AC to DC converter input voltage can be powered under 23.5V .The output power of a coverter is assumed to be 20W .An input voltage of less than 8.5V volts can be used with the AC to DC inverter.A AC to DC power converter's input voltage (AC) should not exceed 265V .
VIPER27HD Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 115kHz
With 16 pins
VIPER27HD Applications
There are a lot of STMicroelectronics VIPER27HD AC DC Converters applications.
- PDAs
- Standby Power Supplies
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Replacements for bulky plug-in transformers
- AC-DC Output Power Conversion Applications
- Off--line Battery Charger
- Shaver Charger
- Battery Chargers
- Battery chargers for cellular phones
- Standby Power Supplies
