VIPER27HDTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPer™ plus |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 20W |
| Max Power Dissipation | 24W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | VIPER27 |
| Pin Count | 16 |
| Input Voltage-Nom | 14V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 3.5mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Output Power | 20W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.74A |
| Frequency - Switching | 115kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 80 % |
| Isolation | Non-Isolated |
| Output Isolation | Isolated |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 14V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 10mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER27HDTR Overview
An embedded ac to dc converter is included in 16-SOIC (0.154, 3.90mm Width) package.It is available in Tape & Reel (TR) AC/DC power converter.This AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.At this point, the switching frequency reaches 115kHz .Supply voltage (Vcc/Vdd) does not need to exceed 8.5V~23.5V .There have been 16 terminations of this program.In this ac/dc converter, there are 16 pins.The pins of the ac-dc converter total to 16 .Suitable mounting is provided by Surface Mount .It is a member of VIPer? plus manufacturer family.You can search similar acdc converters based on VIPER27 family.The ac to dc conversions are contained in Switching Regulator or Controllers .Ac to dc inverters can only be powered at a maximum current of 0.74A .You may read the REACH SVHC standard at No SVHC .The AC to DC converter can be powered from the input voltage under 265V .Coverters generate 20W in terms of output power.It is possible to use the AC to DC inverter with an input voltage less than 85V V.It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 265V .Currently, there are 1 channels available.
VIPER27HDTR Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 115kHz
With 16 pins
With 1 channels on it
VIPER27HDTR Applications
There are a lot of STMicroelectronics VIPER27HDTR AC DC Converters applications.
- Standby and Auxiliary Power Supplies
- White goods
- Utility meters
- MP3
- Battery chargers for cordless
- Shaver Charger
- Home appliances
- Rice Cooker
- USB type-c v1.2 chargers with optional VDM
- Remotely-controlled appliances
